程序员人生 网站导航

rhel6.4网络安装kvm虚拟机

栏目:服务器时间:2014-12-16 08:51:59

本次实验环境如图1所示


1:安装条件条件:

1.确保主板支持intel-VT或AMD-V

2.VMware里的rhel 6.4已装好,并且已设置该虚拟机也支持虚拟化,设置以下所示


3.通过命令确认是不是支持intel-VT或AMD-V

[root@localhost ~]# egrep --color "vmx|svm" /proc/cpuinfo

有结果返回就说明支持,反之亦然

 

2:安装KVM并配置网卡桥接(桥接到eth1上),在已安装的rhel 6.4 (图 1所示)上操作

1.安装KVM

[root@localhost ~]#yum -y groupinstall Virtualization "Virtualization Client" "Virtualization Platform" "Virtualization Tools"

[root@localhost ~]# /etc/init.d/libvirtd start ; chkconfig libvirtd on

[root@localhost ~]#/etc/init.d/libvirt-guests start ; chkconfig libvirt-guests on

 

2.网桥设置

[root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1

DEVICE=eth1

HWADDR=00:0C:29:3F:5A:2e

TYPE=Ethernet

ONBOOT=yes

NM_CONTROLLED=no

BOOTPROTO=static

IPADDR=172.16.1.1

NETMASK=255.255.255.0

BRIDGE=br0                                                                                      //添加这1行

 

[root@localhost network-scripts]# pwd

/etc/sysconfig/network-scripts

[root@localhost network-scripts]# cp ifcfg-eth1 ifcfg-br0

[root@localhost network-scripts]# cat ifcfg-br0

DEVICE=br0                                                                                       //装备名为br0

TYPE=Bridge                                                                                     //设别类型为Bridge

ONBOOT=yes

NM_CONTROLLED=no

BOOTPROTO=static

IPADDR=172.16.1.1

NETMASK=255.255.255.0            

重启网络

[root@localhost network-scripts]#/etc/init.d/network restart

查看网桥信息

[root@localhost network-scripts]# brctl show

bridge name     bridge id               STP enabled     interfaces

br0             8000.000c293f5a2e       no                    eth1                                                  //已桥接到eth1上

virbr0          8000.525400635d23       yes                virbr0-nic

 

3:配置dhcp+tftp+vsftpd网络安装服务器

◆.安装dhcp

1.[root@localhost ~]# yum -y install dhcp

 

2.配置dhcp

[root@localhost ~]# grep -v "^#"/etc/dhcp/dhcpd.conf |grep ^[^$]

default-lease-time 600;

max-lease-time 7200;

next-server     172.16.1.1;

filename        "pxelinux.0";

ddns-update-style none;

log-facility local7;

subnet 172.16.1.0 netmask 255.255.255.0 {

 range 172.16.1.2 172.16.1.10;

}

[root@localhost ~]#

 

3.启动dhcp服务

[root@localhost ~]# /etc/init.d/dhcpd start;chkconfig dhcpd on

Starting dhcpd:                                           [  OK  ]

[root@localhost ~]#

 

◆.安装tftp-server和syslinux

1.[root@localhost ~]# yum -y install tftp-server syslinux

 

2.配置tftp

[root@localhost ~]# grep -v "^#"/etc/xinetd.d/tftp

service tftp

{

       socket_type             = dgram

       protocol                = udp

       wait                    = yes

       user                    = root

       server                  =/usr/sbin/in.tftpd

       server_args             = -s/var/lib/tftpboot

       disable                 = no                                                                                    //把yes改成no

       per_source              = 11

       cps                     = 100 2

       flags                   = IPv4

}

[root@localhost tftpboot]# pwd

/var/lib/tftpboot

[root@localhost tftpboot]# cp /usr/share/syslinux/pxelinux.0 ./

[root@localhost tftpboot]# mkdir pxelinux.cfg

[root@localhost tftpboot]# cp /media/rhel/isolinux/* ./   ///media/rhel为光盘挂载目录

[root@localhost tftpboot]# cp isolinux.cfg pxelinux.cfg/default

[root@localhost tftpboot]# chmod 644 pxelinux.cfg/default

[root@localhost tftpboot]# vi pxelinux.cfg/default (其中红色为更改处)

default linux

#prompt 1

timeout 600

 

display boot.msg

 

menu background splash.jpg

menu title Welcome to Red Hat EnterpriseLinux 6.4!

menu color border 0 #ffffffff #00000000

menu color sel 7 #ffffffff #ff000000

menu color title 0 #ffffffff #00000000

menu color tabmsg 0 #ffffffff #00000000

menu color unsel 0 #ffffffff #00000000

menu color hotsel 0 #ff000000 #ffffffff

menu color hotkey 7 #ffffffff #ff000000

menu color scrollbar 0 #ffffffff #00000000

 

label linux

 menu label ^Install or upgrade an existing system

 menu default

 kernel vmlinuz

 append initrd=initrd.img ksdevice=eth0 ks=ftp://172.16.1.1/rhel6.4.cfg

label vesa

 menu label Install system with ^basic video driver

 kernel vmlinuz

 append initrd=initrd.img xdriver=vesa nomodeset

label rescue

 menu label ^Rescue installed system

 kernel vmlinuz

 append initrd=initrd.img rescue

label local

 menu label Boot from ^local drive

 localboot 0xffff

label memtest86

 menu label ^Memory test

 kernel memtest

 append -

[root@localhost tftpboot]#

 

3.启动xinentd服务

[root@localhost ~]# /etc/init.d/xinetd start ; chkconfig xinetd on

Starting xinetd:                                           [  OK  ]

[root@localhost ~]#

 

◆安装vsftpd

1. [root@localhost ~]# yum -y install vsftpd

2.启动vsftpd服务

[root@localhost ~]# /etc/init.d/vsftpd start ; chkconfig vsftpd on

Starting vsftpd for vsftpd:                                [  OK  ]

[root@localhost ~]#

3.挂载安装光盘到ftp目录下

[root@localhost ~]# mount /dev/cdrom/ var/ftp/pub/

 

◆配置ks文件

1.ks文件内容以下

[root@localhost ~]# cat rhel6.4.cfg

#platform=x86, AMD64, or Intel EM64T

#version=DEVEL

# Firewall configuration

firewall --disabled

# Install OS instead of upgrade

install

# Use network installation

url --url="ftp://172.16.1.1/pub"

# Root password

rootpw --iscrypted$1$p4HkNd7X$xOiflpAb0Rsi6Ec2R1F9l1

# System authorization information

auth --useshadow  --passalgo=sha512

# Use text mode install

text

# System keyboard

keyboard us

# System language

lang en_US

# SELinux configuration

selinux --disabled

# Do not configure the X Window System

skipx

# Installation logging level

logging --level=info

# Reboot after installation

reboot

# System timezone

timezone Asia/Shanghai

# Network information

network --bootproto=dhcp --device=eth0 --onboot=on

# System bootloader configuration

bootloader --location=mbr

# Clear the Master Boot Record

zerombr

# Partition clearing information

clearpart --all --initlabel

# Disk partitioning information

part / --fstype="ext4"--ondisk=vda --size=4000

part swap --fstype="swap" --grow--ondisk=vda --size=1

 

%packages

@base

gcc

gcc-c++

libstdc++-devel

make

openssh-clients

acpid

 

%end

 

%post

 

echo"ttyS0">>/etc/securetty

sed -i '/quiet/a console=ttyS0' /boot/grub/grub.conf

sed -i '/quiet/N; s/ / /' /boot/grub/grub.conf

 

cat >>/etc/yum.repos.d/network.repo<<EOF

[Server]

name=Red Hat Enterprise Linux 6.4

baseurl=ftp://172.16.1.1/pub/Server

enabled=1

gpgcheck=0

 

 

[HighAvailability]

name=Red Hat Enterprise Linux 6.4

baseurl=ftp://172.16.1.1/pub/HighAvailability

enabled=1

gpgcheck=0

 

 

[LoadBalancer]

name=Red Hat Enterprise Linux 6.4

baseurl=ftp://172.16.1.1/pub/LoadBalancer

enabled=1

gpgcheck=0

 

[ResilientStorage]

name=Red Hat Enterprise Linux 6.4

baseurl=ftp://172.16.1.1/pub/ResilientStorage

enabled=1

gpgcheck=0

 

[ScalableFileSystem]

name=Red Hat Enterprise Linux 6.4

baseurl=ftp://172.16.1.1/pub/ScalableFileSystem

enabled=1

gpgcheck=0

EOF

[root@localhost ~]#

 

注:ks文件制作这里不做演示,我已提早做好

 

2.复制rhel6.4.cfg到/var/ftp/目录下

[root@localhost ~]# cp rhel6.4.cfg /var/ftp/

 

4:开始安装虚拟机,virt-manager图形界面安装在这里不做演示,这里只演示通过ks文件安装

1.location+"extra-args"方式安装

[root@localhost ~]# virt-install

> --name rhel6.4⑴

> --ram 1024

> --vcpus 1

> --os-type=linux                            //可以不需要这句,只支持URL方式

> --os-variant=rhel6                        //可以不需要这句,只支持URL方式

> --network bridge=br0

> --file /var/lib/libvirt/images/rhel6.4⑴.img

>--file-size 5

>--nonsparse

> --location ftp://172.16.1.1/pub/

> --extra-args "ks=ftp

------分隔线----------------------------
------分隔线----------------------------

最新技术推荐